Rainy season floor is always a problem where the root cause in the end?

South into the rainy season, it is always easy to out of the reality of wooden floor tile deformation problems, and there is a common feature of such cases, that is: the installation of the floor are taken when the moisture-proof measures.

In this regard, most dealers believe that the user's home is “too wet”. Consumers believe that the quality of flooring products have problems. So there are inevitably a variety of quarrels, complaints, maintenance, replacement or compensation issues.

Is it really all floor quality problems? However, the same batch of flooring, the same city, some users have a tile-like deformation in their homes, some users do not, so why is it so?!

In fact, for solid wood flooring wood keel type installation method, the deformation of the floor mainly comes from 3 aspects of moisture influence.

The moisture of the floor

This is the main reason for floor deformation. The moisture content of the floor of a newly completed building can be as high as 20% or more.

Moisture from the wooden keel

In many areas when the floor is laid, the wooden keel is not dried, but then the floor is laid directly on the wooden keel, and the moisture in the keel may also cause the floor to deform.

Moisture in the air

For example, the air humidity in the rainy season is as high as 90% or more, if the paving method is wrong, the moisture in the air will enter the back of the floor (solid wood flooring backboard paint is very little, the moisture is easy to enter), and ultimately lead to the floor tile deformation.

In addition to the above three points, there are some common installation errors easy to step on the mine.

Moisture-proof membrane in the wood keel above the wavy, flooring and moisture-proof membrane produces a large gap between the air is very easy to enter the gap, under the action of moist air, the floor to produce expansion and tile-like deformation.

There is a lack of relevant knowledge, professional training and responsibility of the installers, moisture-proof membrane paving, step on it, resulting in serious damage to the moisture-proof membrane loss of function. There are also moisture-proof membrane seams are not sealed tightly with tape, will also produce varying degrees of breathable phenomenon.

Wrong installation will directly lead to solid wood floor tile deformation, and in serious cases will even produce arching and the board was squeezed crack phenomenon, the consequences are serious.

The correct installation of JEDA solid wood flooring is as follows:

The best way to solve tile deformation is to block moisture contact with the back of the floor, moisture-proof membrane must be in close contact with the back of the floor, you need to play a layer of baseboard on the keel, hold the moisture-proof membrane, to ensure that the moisture-proof membrane and the back of the floor in close contact. This can effectively block the ground, wood keel and air moisture from the back of the floor into the floor, completely solve the problem of tile deformation of solid wood flooring.

It can be seen that the tile deformation of solid wood flooring, not the quality of the floor itself, but due to moisture triggered by the wood. Wet expansion and dry shrinkage is the inherent characteristics of wood, it is difficult to avoid. Selection of high-quality JEDA solid wood panels and experienced installers is particularly important, tile deformation phenomenon can be completely avoided Oh.